Stop paying $79 per Visit for Inspections. Get two for only $99/year with BAM!

Join Today!
Thousands of Satisfied
BAM! Members Strong.

Request Your Renewal Online or
Download Order Form to Mail-In »

Beyond the Tune-ups

If your home has multiple heating and air conditioning systems, you can already see how the BAM Plan pays for itself with the first tune-up.

With Abacus, value always goes much deeper than price – Value has to include quality and customer experience. Such is the case with the Abacus’ Bi-Annual Maintenance (BAM) plan. The value of the BAM Plan will only increase if you ever have an emergency repair job. Abacus offers Preferred Scheduling & Pricing exclusively to BAM Members.

Start your BAM Membership now. It’s only $99 per year. When you do, you will join the thousands of satisfied Abacus customers who enjoy the peace of mind brought by these annual heating and cooling tune-ups.

Here’s What You Get with the BAM Plan:

Front of the Line VIP Scheduling

Should an emergency arise with your heating or air conditioning systems, you will receive priority scheduling at no additional cost during business hours.

Generous Member Savings

Enjoy savings on parts and labor. We will tell you the cost in advance, so you don’t have to watch the clock or worry about surprising overtime fees..

Spring & Summer AC Tune-up

We perform a 30-point inspection and tune-up on your Air Conditioning system.

Fall & Winter Heating Tune-up

Abacus licensed technicians run a 29-point inspection and tune-up on your Heating system..

Automatic Scheduling

Abacus will track your tune-ups and contact you to schedule these maintenance visits.

 Spring/Summer AC Inspection

• Check Inside Cooling Coil, if accessible: Build-up on the coil reduces the system’s ability to cool, making your air conditioning run longer, increasing energy consumption and raising your cooling costs.
• Check Primary and Secondary Drains: A clogged condensate drain increases humidity levels and can cause ceiling damage.
• Check Outdoor Condenser Coil for Cleanliness: Foreign material on the condenser reduces the system’s cooling capacity. A dirty coil will increase your cooling cost by 50% or more, and can shorten the life of your air conditioner.
• Check Operation Pressures for Proper Refrigerant Charge: Improper refrigerant charges – too much or too little – can damage the compressor and will cause high electric bills, and reduced cooling capacity due to efficient equipment operation.
• Adjust Blower Components: Proper adjustment of blower and components is necessary for adequate airflow to assure maximum cooling performance.
• Monitor AC Cycle: Our trained Technician will assure that the air conditioner is cycling properly.
• Monitor Voltage & Amp. Draw on all Motors: Motors are designed to operate at standard voltage and amperage draw. By measuring amperage draw, problems can be identified before the unit fails.
• Check and tighten all Loose Electrical Connections: Loose electrical connections are a common source of problems which cause your electric parts to fail and your air conditioner to become inoperative.
• Check Thermostat for Proper Operation: To ensure even temperature control for your environment.
• Check Air Filtration: Check the air filter for any debris or excessive amounts of dust accumulation.

Fall/Winter Heating Inspection

• Adjust Blower Components: Proper adjustment of blower components is necessary for adequate airflow to ensure your furnace can deliver maximum heating capacity and efficiency.
• Check & Test Safety Controls: Safety controls are essential for proper protection of the unit and your home.
• Monitor Furnace Cycle: We will assure that the system is cycling properly, and that controls are calibrated correctly.
• Adjust Gas Pressure, if needed: Proper gas pressure will ensure the most efficient and safe burner operation and reduces energy costs.
• Check for Cracked Heat Exchanger: As furnaces age, cracks can develop in the heat exchanger, which can allow dangerous gases (including carbon monoxide) to enter your home and endanger your safety. We will thoroughly inspect your heating system to determine if this hazard is evident.
• Monitor Flue Draft for Safe Operation: An obstructed flue will cause products of combustion to enter your home.
• Adjust Heat Anticipator Settings: The heat anticipator in your thermostat determines how often your furnace cycles and will affect the cost of operation, as well as the comfort level.
• Check & Adjust Ignition Operation: A properly adjusted ignition assures that your furnace will start reliably all winter.
• Adjust Air Flow for proper Temperature Use, if needed: Properly adjusted blower speed will ensure efficient and reliable furnace operation and comfort.
• Check and tighten all Loose Electrical Connections: Loose electrical connections are a cause of equipment failure.
• Monitor Voltage & Amp. Draw on all Motors: Motors are designed to operate at standard voltage and amperage draw. By measuring amperage draw, problems can be identified before the unit fails.
• Check Thermostat for Proper Operation: To ensure even temperature control throughout your home.
• Microbial Growth Inspection: Check for any microbial growth around ducts and vents
• CO2 Check: Check for Carbon Monoxide gas from the running furnace.
• Check Air Filtration: Ensure that the air filter is clear of debris and dust.
• Check for Gas Leak at Furnace: Inspect furnace for any indications of a loose gas line or faulty connection.