An Abacus state certified HVAC technician will perform the following multi-point inspection and report back any findings for your review. 

• Check Inside Cooling Coil, if accessible: Build-up on the coil reduces the system’s ability to cool, making your air conditioning run longer, increasing energy consumption and raising your cooling costs.
• Check Primary and Secondary Drains: A clogged condensate drain increases humidity levels and can cause ceiling damage.
• Check Outdoor Condenser Coil for Cleanliness: Foreign material on the condenser reduces the system’s cooling capacity. A dirty coil will increase your cooling cost by 50% or more, and can shorten the life of your air conditioner.
• Check Operation Pressures for Proper Refrigerant Charge: Improper refrigerant charges – too much or too little – can damage the compressor and will cause high electric bills, and reduced cooling capacity due to efficient equipment operation.
• Adjust Blower Components: Proper adjustment of blower and components is necessary for adequate airflow to assure maximum cooling performance.
• Monitor AC Cycle: Our trained Technician will assure that the air conditioner is cycling properly.
• Monitor Voltage & Amp. Draw on all Motors: Motors are designed to operate at standard voltage and amperage draw. By measuring amperage draw, problems can be identified before the unit fails.
• Check and Tighten all Loose Electrical Connections: Loose electrical connections are a common source of problems which cause your electric parts to fail and your air conditioner to become inoperative.
• Check Thermostat for Proper Operation: To ensure even temperature control for your environment.
• Check Air Filtration: Check the air filter for any debris or excessive amounts of dust accumulation.

Limited time offer. Subject to change. Cannot be combined with other specials, offers or discounts without express management approval. Limit one per household. Residential use only.